Product[
Resilience Testing Machine
]information
Product Name: Resilience Testing Machine
Product Model:BA-7015
Product Exhibitor:BANG INSTRUMENT CO.,LTD
Product Document:No relevant documents
Resilience Testing Machine Detail Introduction
Resilience Testing Machine
Description
Provide a fixed diameter and good quality of steel ball, falls within the specified height freely foam specimen, calculate the maximum height of the ball rebound and the ball drop height ratio of the percentage that spring rate to rebound rate is expressed resilience foam. It is resilience elasticity and strength testing for foam sponge.
Product Features:
According to standard: QB/T1952.1-2003、QB/1952.2-2004、GB/T10357.1-1989、QB/T1951.2-1994、ISO 8307, ASTM D3574 & GB/T 6670….Etc.
Specifications & parameters:
Specimen:1、Specimen requirements: Sample have to be rectangular, the upper and lower surfaces should be parallel to each other. Sample not allowed with the epidermis.2、Dimension of specimen: Length is 100 mm, width is 100 mm, height is 50 pmm. If the sample thickness is less than 50 mm, should be superimposed to 50m m, but can not use adhesives.