This tensile strength testers are widely applied to determining elongation,compression,flexing,tear,peeling,shear force,adhesive force, etc.of finished or semifinished products such as rubber,plastic,footwear, leathers,metal,wire,paqer,timber,etc.
The accessories such as the different grips, elongation measuring-devices... etc. are equipped according to the requirements specified in the contract; our sales representative will also give the proper suggestions to our customer beforehand.
Capacity (optional) :50kN, 100kN 200kN 300kN 500kN 1000kN
Unit (Switchable) :kgf, lbf, N, kN, kPa, Mpa
Stroke (exclude the grips) :1050 mm 1280 mm
Effective width :800 mm 1000 mm
Test Speed: 0.0001~500 mm/min (Selectable 0.001~250 mm/min.001~200 mm/min )
Speed Accuracy:±0.5%
Stroke Resolution:0.00003mm
Computure Acquisition Frequency:200 times/sec (or 500 times/sec)
Load Resolution :1/200,000. 1/300,000 or specified by user
Load Accuracy :±1.0%. ±0.5% (capacity of load cell is 1/250% above)
Load Range Rangeless (full scales at the same ampification)
Communication Interface:USB 2.0 system
Motor AC servo motor
Dimension (W×D×H): Main Unit 114 × 70 × 210 cm 126 × 80 × 220 cm 126 × 85 × 250 cm 128 × 90 × 275 cm 142 × 110 × 320 cm
Computer / Desk :165 × 65 × 80 cm
Weigth (approx.):Main Unit 717kg (exclude the grips) 1050kg (exclude the grips) 1230kg (exclude the grips) 1750kg (exclude the grips) 2500kg (exclude the grips)
Computer / Desk :102 kg
Power :3∮, 220V, 20A / 3∮, 380V, 15A (or specified by user) 50Hz/60Hz 3∮, 220V, 25A / 3∮, 380V, 20A (or specified by user) 50Hz/60Hz