What are the reference standards of full-scale environmental chamber for determining indoor materials and products VOCs by ASTM D6670-2013?
1 2 3 4
Skill Support
What are the reference standards of full-scale environmental chamber for determining indoor materials and products VOCs by ASTM D6670-2013?

This practice is intended for determining volatile organic compound (VOC) emissions from materials and products (building materials, material systems, furniture, consumer products, etc.) and equipment (printers, photocopiers, air cleaners, etc.) under environmental and product usage conditions that are typical of those found in office and residential buildings.
Through this standard test, the VOCs emission in each product can be measured accurately, and the damage to the human body is determined. At the beginning of the standard formulation, a large number of relevant standards are referred to, for example:
ASTM D1356 Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D1914 Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D3686 Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D5116 Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM D5197 Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM D5466 Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)
ASTM D6196 Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
ASTM D6345 Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D7706 Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM E741 Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM E779 Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E1333 Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

Article From http://www.bangtest-china.net            Author Bang Instrument co.,ltd
Products
Contact us
Links

Wheelchairs Test Series   Tensile Strength Tester   Paper / Cardboard / Carton   Formaldehyde / VOC   Tape / Stickers   Furniture / Luggage / Office Furniture   Environmental Test Chamber   Temperature and humidity chamber   Mattress testing equipment / Bed Test  

Copyright© 2003-2012 Bang Instrument Co.,LTD Copy right    Backgroud management